I don’t care what your drywall water injury actually is, the very first thing that had been going to want to do is to search out out where the water injury is definitely coming from. Repairing a gap in your drywall might appear to be a problem when you’ve by no means done it earlier than. Minimize three sides of the square using a drywall noticed. Along with the patch, you need drywall patching compound to clean out the patch and a putty knife to unfold the drywall compound over the patch.
As soon as the compound is dry, the contractor will proceed to sand the floor down, so it seems as uniform as doable with the rest of the wall. Taping knife, and sand solely the final coat. If working with a larger gap, the contractor will sometimes begin by slicing the opening into a sq. form forward of time.
Cut alongside the lines on the wall with a drywall knife. Minimize a piece of drywall into a sq. form that’s 2 inches bigger in width and peak than the realm to be repaired. All you must do now could be prime the patch using a drywall primer then paint the patch to match the prevailing wall coloration.
Lower a piece of drywall into a sq. somewhat bit larger than the opening. Often you’ll discover a wire, pipe or duct (Picture 1). If so, work carefully around them with a drywall or keyhole saw. Use a pair of C-clamps to fasten the backing board to the encircling drywall.
When using drywall screws, be sure to recess the heads slightly, creating a dimple within the drywall floor that may be covered with joint compound, however watch out not to tear by means of the paper floor. Unfold drywall compound and add mesh. For medium holes, use a drywall metal patch.