Drywall is the standard in wall construction for most houses and businesses in the U.S. Its low price, huge availability and ease of set up makes it an inexpensive possibility for both builders and residential homeowners. For a knock-down finish – one where a trowel presses joint compound down to form a texture that is extra mottled than a flat wall – frivolously flatten the particles with a knife as the compound combination begins to dry. Step one of the repair is to drive nails back down utilizing a nail set (Photograph 1). In case you have screws, dig the drywall compound from their heads with a utility knife and turn them in tight with a screwdriver.
Be certain it is the similar thickness as the drywall already present. So as to add sturdiness to the repair, the contractor might apply an adhesive patch made from aluminum display screen to the dried and sanded compound. Choose a putty knife appropriately sized to the blemish, and, if a couple of layer of compound is required, make sure you permit each layer to dry utterly between applications.
Cut a square of drywall barely larger than the outlet. Drywall is comparatively simple to put in and simple to restore. Once the screening is attached, they will apply another layer of the compound and sand it once it’s dry. Remove the drywall over the stud utilizing a utility knife.
Also, “a very powerful thing with a repair is to build the joint out wider than you’ll normally,” says drywall contractor Rick Schwartz, who serves as secretary treasurer of Marietta Drywall in Marietta, Ga. The secret is to depart a wide and very shallow slope on all sides, he says.
When the second coat is thoroughly dry, sand evenly to smooth out any bumps. The trick is to apply compound for the second and third coats solely on one facet at a time. Sand the patched space with a sanding sponge till it feels smooth and even. If the hole is deep, allow the patch to dry, sand frivolously with 120-grit sandpaper, and reapply spackling compound.